Home > News > fiberglass >

What is the properties of fiberglass?

News Group
Certificates

    What is the properties of fiberglass?

    Issue Time:2012-07-17
       Fiberglass are useful because of their high ratio of surface area to weight. However, the increased surface area makes them much more susceptible to chemical attack.
      By trapping air within them, blocks of glass fiber make good thermal insulation, with a thermal conductivity on the order of 0.05 W/(mK
      Glass strengths are usually tested and reported for "virgin" fibers: those which have just been manufactured. The freshest, thinnest fibers are the strongest because the thinner fibers are more ductile. The more the surface is scratched, the less the resulting tenacity.[3] Because glass has an amorphous structure, its properties are the same along the fiber and across the fiber.[2] Humidity is an important factor in the tensile strength. Moisture is easily adsorbed, and can worsen microscopic cracks and surface defects, and lessen tenacity.
      In contrast to carbon fiber, glass can undergo more elongation before it breaks.[2] There is a correlation between bending diameter of the filament and the filament diameter.[6] The viscosity of the molten glass is very important for manufacturing success. During drawing (pulling of the glass to reduce fiber circumference) the viscosity should be relatively low. If it is too high the fiber will break during drawing, however if it is too low the glass will form droplets rather than drawing out into fiber.